Ashdown Bass Amplifier

Ashdown ABM C210T-500 EVOII The ABM C210-500 EVO II combo combines the features of the ABM 500 EVO II head with 2 X 10" Ashdown BlueLine drivers plus HF tweeter in a precision tuned cabinet. The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leather cloth covering and chromed metal corners. All amplifier chassis are built from heavy-duty 16 swg zinc coated mild steel, foil lined to minimise interference, and special Ashdown-designed metal handles are used in favour of inferior flip handles which can rattle after years of use. The ABM 500 EVO II is a 575 watts RMS bi-amp bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out, and flat/shaped by footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones. Also footswitchable is the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 500 EVO II features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise. Ashdown BlueLine speakers are specially developed to achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound. Front Panel Back Panel

Ashdown ABM C410T-500 EVOII The ABM C410-500 EVO II combo combines the features of the ABM 500 EVO II head with 4 X 10" Ashdown BlueLine drivers plus HF tweeter in a precision tuned cabinet. The cabinet is constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leather cloth covering and chromed metal corners. All amplifier chassis are built from heavy-duty 16 swg zinc coated mild steel, foil lined to minimise interference, and special Ashdown-designed metal handles are used in favour of inferior flip handles which can rattle after years of use. The ABM 500 EVO II is a 575 watts RMS bi-amp bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out, and flat/shaped by footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones. Also footswitchable is the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 500 EVO II features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise. Ashdown BlueLine speakers are specially developed to achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound. Front Panel Back Panel

Ashdown Engineering - Ashdown Engineering is a British manufacturer of instrument amplifiers, particularly for bass, but also recently moving into the guitar amp market. The company was founded in 1997 by Mark Gooday, a chief engineer and manager at Trace Elliot during their glory years.

Ampeg - Ampeg is an American instrument amplifier manufacturer. Although the company specializes in the production of electric bass guitar amplification, Ampeg manufactures electric guitar and orchestral stand-up bass amplifiers as well.

Paddy Ashdown, Baron Ashdown of Norton-sub-Hamdon - The Right Honourable Jeremy John Durham Ashdown, Baron Ashdown of Norton-sub-Hamdon, GCMG, KBE, PC, (born 27 February 1941), invariably known as Paddy Ashdown, is a British politician, who was leader of the Liberal Democrats from 1988 until 1999. He is now a life peer, and will be until January 2006 the international community's High Representative in Bosnia and Herzegovina.

Gallien-Krueger - Gallien-Krueger is a musical instrument amplifier manufacturer. Based in San Jose, California, it is generally considered the premier maker of 100% solid-state amplifiers for bass guitar.

ashdownbassamplifier

Bass Amp - ... meanwhile, back at the barn . . . Cow sets up her drums. Pig plugs in his amp. Goat tunes his bass. Chicken sets up her keyboards. And Sheep checks the microphone. They are Punk Farm and tonight they're ... meanwhile, back at the barn . . . Cow sets up her drums. Pig plugs in his amp. Goat tunes his bass. Chicken sets up her keyboards. And Sheep checks the microphone. They are Punk Farm and tonight they' ...

Look to Overstock.com for incredible deals on audio and video equipment. Features include: Super high fidelity sound 4-channel bridgeable amplifier Wire bass remote w/LED Built-in full crossover Variable low pass filters. Look to Overstock.com for incredible deals on audio and video equipment. Features include: 1000 watts maximum output power of this bridgeable amplifier. Keep the music with the power of this bridgeable amplifier. Mono block output 2000 watt max Heavy duty chrome plate top Mosfet power supply (PWM) 3-way protection with LED 20Hz-30kHz frequency response High/low impedance input Gold-plated RCA/power/speaker terminals Dual color power/protection status LED Blue interior illumination Features include: Regulated MOSFET power supply 2 Ohm 700W 250W x 2 (4 ohm) 325 watts x 2 (4 ohm) 325 watts x 1 (bridged) 24 dB crossover Variable low pass filter(30-500Hz) Variable high pass filter(50-1KHz) Variable bass boost Variable gain control MOSFET regulated power supply Fully variable crossover control Wired bass remote Variable HPF (high pass filter) 0-18dB variable bass boost at 40Hz 10-30Hz frequency response High/low impedance input Gold-plated RCA/power/speaker terminals Dual color power/protection status LED Blue interior illumination Features include: Regulated MOSFET power supply (PWM) 3-way protection 20Hz-30kHz frequency response Bass boost remote control RMS Power Crank out your music with the power of this bridgeable amplifier. Delivering a maximum output Super high fidelity sound Two-channel bridgeable amplifier Wire bass remote Variable HPF (high pass filter) 0-18dB variable bass boost Variable ashdown bass amplifier.